TOGGLER SNAPTOGGLE BC Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 3/8"-16 UNC Fastener Size (Pack of 25)
On Sale Now! Free Shipping Included! Save 8% on the TOGGLER SNAPTOGGLE BC Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8'' to 2-1/2'' Grip Range, For 3/8''-16 UNC Fastener Size (Pack of 25) by TOGGLER at Knights Of Labor. MPN: 21015. Hurry! Limited time offer. Offer valid only while supplies last. The TOGGLER SNAPTOGGLE BC toggle anchor provides a secure hold from within various hollow materials 3/8'' to 2-1/2'' thick including gypsum board,
The TOGGLER SNAPTOGGLE BC toggle anchor provides a secure hold from within various hollow materials 3/8" to 2-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/8"-16 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 3/4" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Ultimate Tensile and Shear Strength Values
|Media||Drill Diameter||Bolt Description||Ultimate Tensile Strength||Ultimate Shear Strength|
|1/2" Drywall||3/4"||3/8"-16 UNC zinc-plated steel||275 lb.||292 lb.|
|5/8" Drywall||3/4"||3/8"-16 UNC zinc-plated steel||576 lb.||406 lb.|
|1/2" Drywall with 25 Gauge Stud*||3/4"||3/8"-16 UNC zinc-plated steel||466 lb.||Not available|
|5/8" Drywall with 25 Gauge Stud*||3/4"||3/8"-16 UNC zinc-plated steel||488 lb.||Not available|
|Concrete Block||3/4"||3/8"-16 UNC zinc-plated steel||1,745 lb.||Not available|
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
Features & Highlights
- Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
- Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
- Made in USA, and works with 3/8"-16 UNC-threaded metal bolts (sold separately)
- Ultimate tensile strength is 275 lb. in 1/2" drywall and 1,745 lb. in concrete block with a 3/8"-16 UNC bolt
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
|Manufacturer:||Mechanical Plastics Corp.|
|Publisher:||Mechanical Plastics Corp.|
|Studio:||Mechanical Plastics Corp.|
|Item Weight:||1.78 pounds|
|Item Size:||6 x 5 x 5 inches|
|Package Weight:||1.45 pounds|
|Package Size:||5.6 x 4.8 x 4.8 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by TOGGLER, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Morton metric heavy duty flat washer is made from case hardened steel. Black oxide finish. Extra thick for increased strength. Measures 22-millimeters inside diameter, 44-millimeters outside diameter, 6-millimeters thick.Metric heavy duty flat washer...
Morton heavy duty machined flat washer is made from case hardened steel. Black oxide finish. Extra thick for increased strength. Measures 11/32-inches inside diameter, 3/4-inches outside diameter, 3/16-inches thick.Heavy duty machined flat washer. Ma...
mpn: 8520, ean: 5915903693455,
Made from 300 Series Stainless Steel. Full Interior Thread. Diamond Knurl. ...
Morton heavy duty washer is made from stainless steel 300. Extra thick for increased strength. Measures 17/32-inches inside diameter, 1-1/16-inches outside diameter, 3/16-inches thick. 1/2-inches bolt size.Heavy duty washer. Made of stainless steel 3...
mpn: 20561, ean: 0076812205612,
The OEMTOOLS 20561 20 inch 4 way lug wrench is designed so you can loosen and tighten lug nuts with ease. Constructed from carbon steel for durability, and features a cross design that provides extra leverage and torque. This lug wrench features a va...
Morton diamond knurled finger nut machined from Nylatron. Full internal thread. Diamond knurl on head. High strength and rigidity. Measures 1/2-inches diameter by 3/8-inches height, 1/4-inches base diameter, 1/4-inches base height.Machined from Nylat...
Acorn Nuts are Excellent for protecting exposed threads. Available in case hardened steel or stainless steelCase Hardened Steel. Black Oxide Finish. Protects Exposed Threads. ...
By B&C Eagle
mpn: ACR-134, ean: 0649853990429,
B&C Eagle collated fasteners are made to the highest quality standards and are guaranteed to work in tools for which they are intended. Our fasteners work with many brands of pneumatic tools like Bostitch, DeWALT, Senco, Paslode, Duo-Fast, Hitachi, M...
Morton heavy duty machined flat washer is made from case hardened steel. Black oxide finish. Extra thick for increased strength. Measures 1-1/32-inches inside diameter, 2-inches outside diameter, 9/32-inches thick.Heavy duty machined flat washer. Mad...
mpn: FW-412, ean: 5915903693394,
Morton metric heavy duty flat washer is made from case hardened steel. Black oxide finish. Extra thick for increased strength. Measures 13-millimeters inside diameter, 28-millimeters outside diameter, 5-millimeters thick.Metric heavy duty flat washer...