BAILIDA 2-pack 10W R7S Base LED Light Bulb J118 Double Ended J type LED Replacement for Halogen Flood Lamp 100W Equal (Non-dimmable) (Daylight)
Huge Savings Item! Save 12% on the BAILIDA 2-pack 10W R7S Base LED Light Bulb J118 Double Ended J type LED Replacement for Halogen Flood Lamp 100W Equal (Non-dimmable) (Daylight) by BAILIDA at Knights Of Labor. Hurry! Limited time offer. Offer valid only while supplies last. IMPORTANT NOTE: • Please DO NOT switch the power on when installing the bulb. Also, while the bulb is in use, please DO NOT touch the SMD LED's.
• Please DO NOT switch the power on when installing the bulb. Also, while the bulb is in use, please DO NOT touch the SMD LED's.
• No Ballast is Required. Please make sure to remove or bypass the ballast from your existing fixture before the installation of the bulb. Using the ballast will cause the bulb to flicker or even destroy the LED Bulb immediately.
• This bulb is NON-DIMMABLE. Thus, It WILL NOT work with the dimmer switch
• This lamp IS NOT suitable for use in the totally enclosed fixture.
• The actual diameter of this bulb is 1 inches and it is 4.7 inches in length. Probably, it is a little bit bigger than the regular halogen T3 bulb. Thus, please make sure the size can fit your fixtures before placing the order for purchase.
Dimension: L 4.7 in x W 1 in x H 1 in (25mm x 25mm x 118mm)
Power: 10 Watts
LEDs: 72 High Brightness 2835 SMD
Input Voltage: AC 85 - 265V 50-60Hz
Lumen: 900 - 950lm
Light Color: Daylight 6000K
Beam Angle: 360 degree
Lamp Base: R7S Lamp Shape: J118 T3
Warranty: 2 years
Bailida 10W Non-dimmable R7S LED Flood light bulb - x 2 Daylight
Replacement for Traditional halogen double-ended tubes. Mainly used in indoor household lighting, night lighting, advertising, plaque lighting, landscape lighting, hotel lighting, Showroom lighting, workshop lighting, parking lot lighting, garage lighting, clothing store lighting and other occasions, widely used.
Features & Highlights
- •10W R7s Base J-Type Linear LED Halogen/Incandescent Replacement Bulb (Non-dimmable) in a Pack of 2
- •Not Dimmable, Don't work with dimmer switch. Also, No Ballast is Required. It needs to be removed or bypassed the ballast from the fixture before the installation of the bulb. Otherwise, the bulb can turn flicker or even get destroyed immediately
- •Not recommended for use in fully enclosed fixtures
- •Super Bright, Energy saving, Good heat dissipation, No radiation, Environmentally friendly.
- •For use in Floodlight Replacement Bulb, Work and Security Lights, Workshop Lighting, Stage and Studio Lamp, LED Ceramic Metal Halide Lamp, Floor Lamps, Speciality Lights, General Lighting
|Item Weight:||0.23 pounds|
|Package Weight:||0.23 pounds|
|Package Size:||2.17 x 1.57 x 1.57 inches|